TLDR: There's a good chance you can't connect older Pelco cameras to Blue Iris.
#Pelco ip camera utility how to#
The utility will locate the assigned name, IP address, and MAC address for the device (refer to How to Use the Device Utility on page 15). Device Utility 2.3.1 errors with 'Wrong file selection, You have selected wrong PPM file(s). NOTE: If you do not know the IP address of the IP110, install the Pelco Device Utility software available on the CD shipped with the product. Compatible with Oncam Grandeye 3D dewarping software. Attempting to update firmware on Sarix Pro 3, Sarix Enhanced 3 and Spectra Enhanced 7 IP cameras results in the following messages. I've tried turning off keep alives and am running the lastest firmware on the Pelco cameras (which are out of service life now), so I've concluded that either I will need different camera software, or different cameras. With thousands of IP camera options to choose from, theres a Pelco by Schneider Electric IP. You can either try turning off the option to send "keep alives", or contact Pelco for updated firmware." Pelco provides two free software applications, Pelco Device Utility and Endura Utilities, that will search the network and provide a list of.
(Side note, the RTSP stream clearly works outside of Blue Iris as I was able to stream with VLC for over 30 hours straight with no issues.)Įngineering replied and basically said "Yup, that's what seems to be happening. 2022)).Īfter 3 weeks of back and forth with the support agent, he agreed with my diagnosis that the Pelco camera was shutting off the RTSP stream shortly after Blue Iris connects and the RTSP port could only be re-enabled by rebooting the camera and then sent me off to engineering. I had the same issue - contacted Blue Iris support (the free version, which basically means you can expect ~4 days for a reply for every email you send (as of Jan.
0 kommentar(er)
